Quote: Originally Posted by Lee_Davis
2004 330i performance package 6 spd manual.
What brand did you use for the following items:
1 Can expanding foam
I used Great Stuff from Lowes, but I have heard there is some foam that they sell that is a little more expensive and cures more evenly than Great Stuff. It's pretty much all the same, for this project though.
Quote:
1 Small Can Bondo 'Glass' - fiberglass reinforced body filler
1 Small Can Bondo Lightweight body filler
Bondo brand, naturally.
Quote:
1 Can SEM Texture paint
SEM is the only company I know that makes SEM Texture paint
Shops that do bumper work usually keep it in stock. After that try body shop or automotive paint supply places.
Quote:
1 Can Primer
1 Can Paint that matches your interior
I don't even know on the primer, actually.. A spray can of any aerosol primer should do fine. Make sure you get one that says it's sandable and make sure you can paint it on plastics and body filler. As far as the paint, anything will work if you prime your surface. For the paint, I used Krylon Ultra Flat Black and it looks very close to the stock 'rubbery' black BMW interior, so I would recommend it for your application also.
Quote:
Where can I get on of these?
1 Extra housing for your Lilliput/Xenarc monitor if you don't want to sacrifice your own
I hope it's not against the forum rules here, but I believe the mp3car store sells replacements for at least the Xenarc monitors; I don't know about the Lilliput though. If mp3car doesn't have them, DigitalWW might.