I did a quick google and it came up with http://www.serial-port-monitor.com
Haven't tried it yet, but from the screenshots it seems capable of displaying hex data as opposed to plain ASCII, like hyperterminal. Capturing data shouldn't be too difficult.
Quote:
- the dashboard cd#/track#/time fields give information completely unrelated to what you actually hear
Right. Once I select cdchanger as a source, my Connects2 interface permanently displays "CD 1 TR 1" and all cdchanger related commands (either from stalk or HU) are ignored.
How about shooting email to connects2.com for a few hints? 
As for the TTL-to-RS232 issue, I plan on dragging the ol' oscilloscope outside to check on signal levels, but the weather has to improve first. My scope has a storage mode, which might come in handy.
__________________
CarPC status: HW all done, SW needs tweaked.
Hardware: VIA MII-12K, 512MB, 60GB 2.5", CW-8123 DVD-CDRW, 7" Lilli ts, Opus 90W, BU-353 GPS, 802.11b PCI, USB bluetooth dongle, AverMedia AverTV Cardbus Plus, Morex Cubid 3677
Software: RR, MM/FD
|