MP3Car.com - View Single Post

Zebelkhan · 02-16-2006, 11:30 AM

Quote: Originally Posted by xtremak

I have the same problem, my motherboard refuses to boot when +12V is supplied to ignition. I have checked all the rails and the values all look good but the board wont boot up, another thing I noticed is that when I remove +12V from the Ignition wire the board starts to boot up... This to me indicates some timing issue with the ON signal when Ignition is first put to +12V. Has anyone figured out a solution to this as yet.

I have already sent my M1 for replacement (according to AndrewB's PM it was fixed a few months ago) but if you still have yours try DaveB's suggestion on post 21 and let us know if it works for you too.

02-16-2006, 11:30 AM	#27
Zebelkhan Maximum Bitrate Join Date: Dec 2004 Location: Bay Area, CA Posts: 467	Quote: Originally Posted by xtremak I have the same problem, my motherboard refuses to boot when +12V is supplied to ignition. I have checked all the rails and the values all look good but the board wont boot up, another thing I noticed is that when I remove +12V from the Ignition wire the board starts to boot up... This to me indicates some timing issue with the ON signal when Ignition is first put to +12V. Has anyone figured out a solution to this as yet. I have already sent my M1 for replacement (according to AndrewB's PM it was fixed a few months ago) but if you still have yours try DaveB's suggestion on post 21 and let us know if it works for you too. __________________ Compaq Evo D510 e-PC - P4 2.0 - 512M RAM - 120G 3.5 HD - 7" Xenarc 700TSV - DSATX fitted nicely inside the PC case Last edited by Zebelkhan; 02-17-2006 at 12:05 PM.