MP3Car.com - View Single Post

spaceskater · 03-15-2006, 02:35 AM

BTW this is my Ublox GPS. I included a power supply so I can power it from any thing. The silver heat sink hides the voltage regulator. I installed it outside so the heat would not affect the gyro or the temp sensor of the board. Well also I know by board is messy but it works

Hope I could do a nice printed circuit board...

here are the photos!

03-15-2006, 02:35 AM	#94
spaceskater Constant Bitrate spaceskater's CarPC Specs Join Date: Feb 2005 Location: Boston,MA Vehicle: 2001 Jeep Grand Cherokee Limited Posts: 204 My Photos: ()	BTW this is my Ublox GPS. I included a power supply so I can power it from any thing. The silver heat sink hides the voltage regulator. I installed it outside so the heat would not affect the gyro or the temp sensor of the board. Well also I know by board is messy but it works Hope I could do a nice printed circuit board... here are the photos! Attached Images __________________ Will never be DONE! There is always something to add VIA EPIA SP13000,1GB DDR,80Gb 2.5” SATA HDD,8" Xenarc LCD with t/s,Linksys Bluetooth,Logitech wireless trackball,OBDII,RearView wide angle cam,XM radio,2 Wifi external antennas, Frodo,Navivoice