MP3Car.com - View Single Post - Project NiteVision

spaceskater · 05-02-2006, 12:18 AM

Quote: Originally Posted by NiteMax Mark

The Sanyo chip on the NiteMax LCD Controller is made to accept S-Video. If the board itself carries these signals out to the world, you'll be able to feed it S-Video directly and you're done.

I will try to find the time to look at the details and post instructions on getting S-Video to work directly without any adapters!

That would be great!! It would increase the quality of the picture too! Not VGA but good enough! Once again thanks so much Mark!

05-02-2006, 12:18 AM	#164
spaceskater Constant Bitrate Join Date: Feb 2005 Location: Boston,MA Posts: 204	Quote: Originally Posted by NiteMax Mark The Sanyo chip on the NiteMax LCD Controller is made to accept S-Video. If the board itself carries these signals out to the world, you'll be able to feed it S-Video directly and you're done. I will try to find the time to look at the details and post instructions on getting S-Video to work directly without any adapters! That would be great!! It would increase the quality of the picture too! Not VGA but good enough! Once again thanks so much Mark! __________________ Will never be DONE! There is always something to add VIA EPIA SP13000,1GB DDR,80Gb 2.5” SATA HDD,8" Xenarc LCD with t/s,Linksys Bluetooth,Logitech wireless trackball,OBDII,RearView wide angle cam,XM radio,2 Wifi external antennas, Frodo,Navivoice