MP3Car.com - View Single Post - Auto Dim Xenarc/Liliput with illumination wire from radio harness?

Kamakazie2 · 05-22-2006, 02:37 PM

Quote: Originally Posted by Kamakazie2

0v is brightest setting..

So it will operate like this
Monitor set at Full Dim

Lights are off: Relay is in the open position giving 0v to circuit causing backlight to be at max.
Lights are on: Relay is closed causing the origninal circuit of 3.3v (set at full dim) to dim the screen

Relay installed and fully funcitonal.. just cut 1 wire and add a relay and you have full bring to full dim when lights come on..

05-22-2006, 02:37 PM	#9
Kamakazie2 Variable Bitrate Kamakazie2's CarPC Specs Join Date: Mar 2004 Location: New Jersey Vehicle: 06 Chyrsler 300C AWD Hemi Posts: 339 My Photos: ()	Quote: Originally Posted by Kamakazie2 0v is brightest setting.. So it will operate like this Monitor set at Full Dim Lights are off: Relay is in the open position giving 0v to circuit causing backlight to be at max. Lights are on: Relay is closed causing the origninal circuit of 3.3v (set at full dim) to dim the screen Relay installed and fully funcitonal.. just cut 1 wire and add a relay and you have full bring to full dim when lights come on.. __________________ -Jack 2006 Chrysler 300C AWD IBM T30 Thinkpad / RoadRunner XMPCR/GPS/SIRIUS (RIP) HDRadio project: http://www.mp3car.com/vbulletin/hardware-development/93791-someone-here-has-able-crack-hdradio-car.html