I am confused about this J2 connector. Ziplock has the 2 wire plug from the Ampie case connector plugged into this J2. However, the M1 direction say J2 is for the amp remote, and Frankino here says the following:"NEVER wire your amp remote wires to the two pins on the M1, just use the positive one, if you need to groung it (some amps need it) place a fan or a resistor in serie to avoid short circuit. If you do not do it, short circuit WILL appen and WILL damage your M1 for sure (on mine the shutdown logis stopped to work after a bad amp wiring)".
So what's the deal

Check my plan here: find out which one is for the amp remote (since Frankino states not to plug into both) EDIT: Must be the red wire?
Cut the wire that is NOT for the amp remote and run that to 5V. This way at the Ampie plug (outside the case) I'll have one connection for the amp remote and one connection for 5V. Am I on track here or?
http://www.mp3car.com/vbulletin/atta...d=11273535 95