MP3Car.com - View Single Post - Miata In-Dash Fabrication

parksgm · 06-26-2006, 10:37 AM

Quote: Originally Posted by v8 scimitar

Using something like the dremel will take the sweat out of it but will leave you with a very uneven wave like surface.

Using something like this:

Black & Decker Cyclone 4-in-1 Multi Sander

...should allow you to sand much more quickly than by hand, and without the suface gouging that results from dremeling. It has a flat bottom, and multiple speeds. $50 is a bit expensive, but I'm sure you could find one used or off brand for much less. Well worth it in my experience and opinion.

EDIT

Apparently that link doesn't work well...just go to the home depot and search for the product name if you're interested.

06-26-2006, 10:37 AM	#4
parksgm FLAC is for flaccid Join Date: Dec 2005 Location: Dallas, Texas Posts: 1,117	Quote: Originally Posted by v8 scimitar Using something like the dremel will take the sweat out of it but will leave you with a very uneven wave like surface. Using something like this: Black & Decker Cyclone 4-in-1 Multi Sander ...should allow you to sand much more quickly than by hand, and without the suface gouging that results from dremeling. It has a flat bottom, and multiple speeds. $50 is a bit expensive, but I'm sure you could find one used or off brand for much less. Well worth it in my experience and opinion. EDIT Apparently that link doesn't work well...just go to the home depot and search for the product name if you're interested. __________________ Monthly North Texas Meet thread My worklog gDrive Install pics How to add your CarPC specs to your username An amateur built the Ark. The Titanic was built by professionals. Last edited by parksgm; 06-26-2006 at 10:41 AM.