Quote: Originally Posted by MatrixPC
For cable, just make sure you connect the right wire to the 3.5mm jack/plug.
Since you already have the AiNet cable, just buy RCA - 3.5mm jack and call it a day. You don't have to worry about soldering a wrong/reverse pin.
For the second time, he doesn't HAVE a premade AI-NET aux-in. He took a standard AI-NET cable that he cut in half and is butchering to make the connection.
Tip - The outermost connector on a 3.5" conneciton
Ring - The center connector
Sleeve - The most inner connector
Tip - Left
Ring - Right
Sleeve - Ground
If it's freezing the HU, it's possible the pinout you have is incorrect. I believe as far as the AI-NET switch, it should probably be on the Non-EQ setting.