|
Lastly, I spray on my basecoat and clearcoat. As I mentioned before, the foam will not melt from polyester resins, acetone, lacquer thinner... the whole mess, so you can use whatever finish you like. The most important part is filling and priming... but once you get it smooth to your liking, you can use rattle cans from the HW store if you want.
But after it's all cured, said and done, I glue the bezel into the dash opening and voila. Professional looking trim for that funky dash that Scosche and Crutchfield don't make kits for.
Hope this proves helpful.
|