|
I managed to just mod the LCD case a little, move the LCD buttons to the back of the case (hot glue) then hot glue the LCD case to the Metra double-din kit. Then run the video and power cables to the trunk for the PC. I have the factory radio's key power (+) running to the back as a signal wire. That way, the amp, PC, and LCD all stay on until the door is opened just like the factory setup. The signal wire acts as the amps remote turn on, the PC's remote turn on, and acutally powers the LCD directly. So I think a total of 4 wires were run and some RCA cables for the factory amp (shaker system) and that's it. I ran everything under the console, under the capet between the console and the rer seat and then under the rear seat to the trunk. I've got a ton of slack right now but I will soon either cut out the slack or move the PC to the far back passenger side corner (the video cable even reaches there with slack)! Let me know if you need any more help or explination.
Mike
|