MP3Car.com - View Single Post

M pro · 03-13-2003, 06:26 PM

It wasn’t that hard really

I took the RGB from pins 1,2,3 on the VGA card and connected them to RGB pins 9,11,12 on the LCD

Then I took the H sync and V sync pins 13,14 on VGA and joined them together and then connected them to pic 6 on the LCD

Obviously I connected ground to pin one

And last but not lest I connected a resister to the red input then I connected the V and H sync to the resister.

Set the card to run at 15ohm and that was it

here it is in windows

but i really need to know how to boost the RBG signal

03-13-2003, 06:26 PM	#7
M pro Low Bitrate Join Date: Mar 2003 Location: UK Posts: 78 My Photos: ()	It wasn’t that hard really I took the RGB from pins 1,2,3 on the VGA card and connected them to RGB pins 9,11,12 on the LCD Then I took the H sync and V sync pins 13,14 on VGA and joined them together and then connected them to pic 6 on the LCD Obviously I connected ground to pin one And last but not lest I connected a resister to the red input then I connected the V and H sync to the resister. Set the card to run at 15ohm and that was it here it is in windows but i really need to know how to boost the RBG signal