I saw this board on
www.epiacenter.com from
www.itox.com.
They have also anounced two core 2 duo conroe Atx and micro ATX boards.
Sample quantities are available now.
The G5C100-N-G has what seems to becoming a standard config - intel core 2 duo merom with i945G/ICH7m chipset. Two ethernet ports seem nice, but I am not sure what I will use the second for. I hope I didn't make any transposition errors or didn't forget to include key info, and I will double check with Itox to insure Core 2 Duo (Merom) support.
I like what I see so far and definitely am going to consider it in my CarPC/Home entertainment sys
A G5C100-N-G FEATURE SUMMARY follows:
Mini-ITX form factor 6.7” x 6.7”, 170mm x 170mm, 6-layer PCB!
Intel® Core™ Duo/Solo, Celeron® M processors
Intel® 945GM Express chip set
667/533MHz Front-Side Bus
Two 200 pin SODIMM sockets Up to 4GB DDR2-667 memory
Intel® Graphics
1 PCI slot for PCI expansion card or customized riser
card for 1, 2 or 3 PCI slots expansion
1 Compact Flash socket
Realtek ALC655 for 5.1 Audio
S/PDIF digital audio output
Dual Gigabit Ethernet 10/100/1G
using two Marvell 88E8053 PCI Express Gigabit controllers
Eight USB 2.0 ports - 4 rear panel
Four RS-232 serial ports – 3 DB9 rear panel
PS/2 keyboard and mouse ports
IrDA interface
Two SATA 1.5 Gbps ports
Two IDE Devices - One Ultra ATA100 port
Award™ BIOS – 4 Meg Flash
Damage Free Intelligence
watchdog timer
CPU/System Temp, fan speed, CPU voltages and failure alarm
GPIO port
ACPI
APM 1.2, RoHS compliant
-------------------------------------------------
i use a 200 MHZ Pentium II sys and 300 MHZ G5 Apple computer
Badly in need of update
