Quote: Originally Posted by
morris_the_cat 
Hey guys, the power and reset button have one lead each coming out of the unit. Should I twin each of those with a lead from the black ground wire, and then connect them to the M2 power jumpers (J9) and the motherboard reset jumpers respectively? They are quite thin wires, so I wouldn't use it for a power switch in line with the main power leads to the M2. I will probably add a heavy duty switch for that. Any thoughts would be greatly appreciated.
No, don't "twin" them
Each wiire should, when the button is pushed, go to ground. The pin headers on the MB has 2 pins. One is negative, the other pin has to be grounded to operate. Basically, take the wire from the unit and put it to the pin that is NOT grounded on the MB, and you will be fine.
Michael
__________________
...I love the French language...especially to curse with...Nom de Dieu de putain de bordel de merde de saloperies de connards d'enculés de ta mère. You see, it's like wiping your *** with silk, I love it.
www.yellinlawoffice.com