pancit175

Ok so here's the situation. I've had the Dsatx for a couple weeks now and it works great. Now I havent had any problems with the powersupply overall. Default settings, it powers up just fine and shuts down perfect.

When I initially installed the Brainstem to my COMB port directly on the MB it had a difficulty starting up. I didnt have any warrning flashes on the LED. The temperature and voltage were within programed threshold settings. Since the the brainstem had been plugged into the DSATX it has difficulty starting up and shutting down with the ACC going to Low or High.

Now, ever since I disconnected my brainstem off of the dsatx, It works perfect with the programed settings I changed. Startup, shutdown, yada, yada, yada!

My question now is, Can the brainstem safely be connected to the DSATX at all times and retain complete functionality or is this not possible and/or reccomended against?

__________________
" In the beginners mind there are many possibilities, but in the experts mind there are few. "- Shunryu Suzuki
"Do it right or don't do it at all"

PROGRESS:
[DONE&DONE] (Considering a redesign)