|
Like Toaster said,
If the unit is actually connected the way you said it is, with the constant power and ingition power to the battery positive, and the ground to the negative, and in Dumb PSU mod, and you have no power on the ATX wires, then something is wrong.
Confirm you have installed the wires correctly. Confirm your jumper settings. Check your board for anything that looks borken or burnt up.
There is a known issue with the M2 and the Epia boards, you can look into that as well, but again, no power on the ATX wires means something is wrong. Have you check the on board fuse to see if it is good. You said you confirmed power to the M2 is good, how did you do that/where did you test?
Michael
__________________
...I love the French language...especially to curse with...Nom de Dieu de putain de bordel de merde de saloperies de connards d'enculés de ta mère. You see, it's like wiping your *** with silk, I love it. www.yellinlawoffice.com
|