alvin986

Hi!
I'm planning to install an aftermarket HU in the mitsubishi lancer 2008.
My question is : Does anyone have the wiring schematics or harness pinout ?
I've found like 5 different things,and none of them have the connector like mine.Hiere's the picture of the connector.
If that's not possible i'm gonna redo all the wiring,but how to find out wich1 are the speaker wires so i don't have to tear apart the door panels.

cheers and thanks !

P.S.

Hiere's the picture of the connector

MP3Car.com

 

WuNgUn

Have you tried over here?
http://www.the12volt.com/installbay/vehicles.html

alvin986

i'm heaving trouble to find the wiring for the 08 lancer.
i have the harness for the earlyer lancers but it doesn't fit

WuNgUn

Maybe these guys can help you...
http://www.mitsunation.net/forumdisplay.php?f=134

strife

I did a write up for this on another forum. Here you go.
http://forums.evolutionm.net/showthread.php?t=373383

strife

if you just need a wiring harness order one from crutchfield, i did.

alvin986

so at the end it will work as the normal harness?

strife

I don't understand the question.
At the end of what?
The post I did was to make a aftermarket head unit work with the factory Fasgate amp. If you don't have the 650 watt Fasgate system you just need the wiring harness from any audio shop.

MP3Car.com

 

alvin986

if i understad correctly...
If i wire this way,i won't be able to fade between front/rear ?

alvin986

oh yes...i forgot to mention,i don't have the premium rockford fosgate system
i have a DE package.

strife

Correct. The stock amp does all the settings, fading, etc. That post won't help you then. I'm sure you can find rhe stock DE wiring if you search on that forum.

alvin986

i have the basic system (without the sub) 6 speaker setting

alvin986

so the amp is located in the HU like in the aftermarket HU,so that outputs should be direct to speaker connections?

strife

yes, thats right.

MP3Car.com