Audigy NX2 and Amp question

pirate_king00 · 02-14-2005, 11:26 PM

I have the Sound Blaster Audigy2 NX sound card along with a JL Audio E6450 amp. Now my question is that I am going to Bridge channel 5 +6 for the subwoofer. Now seeing How I am not going to be using the center channel on the Audigy, what type of cable do I need to utilize both RCA cables going to Channel 5+6 (Bridged). Do I need the 3.5mm to RCA splitter, than a single RCA to DUal RCA? This just seems like way too many adapters. Please let me know if there is a specific cable that I need. I dont want the center channel freq. going to the sub.

Thanks

Nic · 02-14-2005, 11:29 PM

Quote: Originally Posted by pirate_king00

Do I need the 3.5mm to RCA splitter, than a single RCA to DUal RCA?s

yes

pirate_king00 · 02-14-2005, 11:52 PM

Thanks, I was hopeing that a cable existed to eliminate an extra cable.

ppgt94 · 02-15-2005, 12:21 AM

Could use a stereo RCA -> 3.5mm cable and only use one channel (L or R)?

pirate_king00 · 02-15-2005, 01:02 AM

That would not allow me to meet my goal of running channel 5 & 6 bridged. You need 2 inputs into the amp.

ppgt94 · 02-15-2005, 02:26 AM

Many time channels 5 and 6 (sub and center out) share the same output jack on the sound card use a stereo 3.5 mini jack. The tip is for one channel and the second ring is for the other. If these is how your sound card is this would be a good solution.

User Name		Remember Me?
Password