laker160th

I bought a new stereo for my tahoe. I used an installation wiring kit but my speakers don't work. I have a second plug that was plugged into the factory head but has nowhere to plug into the kit. I am pretty certain this plug is for the speakers. I'm looking for a wiring diagram so i can hard wire or any other recommendations.

MP3Car.com

 

Dennis5587

...did you wire the two adapters together?

With your stereo should be one, and with the wiring kit should be a second, the one from the wiring ki plugs into the cars stock connector, and the one from the stereo plugs into...the stereo. Then you match up the two by the charts explaining what wire is for what

__________________

scott_fx

do you have bose?

__________________
New System in progress:
M10k
Phaze TD1500 ~> Dynaudio MD130
Phaze TD1500 ~> Seas g18rnx/p
Zapco Ref 500.1 ~ 12" tc-9
Behringer DCX2496 ~ Envision Electronics psu
Transflective Xenarc

My Car Pc Install

pancit175

The pink wire should be the factory amp turn on located in the second plug that you are not using. This wire should be hooked up the the blue/white wire coming out of the headunit you are putting.

Also, from now on, could refer any non-carpc related questions to here:
http://www.mp3car.com/vbulletin/car-audio/82850-have-car-audio-specific-questions.html

__________________
"In the beginners mind there are many possibilities, but in the experts mind there are few."- Shunryu Suzuki
"Do it right or don't do it at all"

PROGRESS:
[-------90%-] (New Car=New Build)

MP3Car.com