Hardware solution to kill frozzen Processus

coucouillu · 10-20-2006, 06:09 PM

Hi,

Today I have CF crashed 3 time when driving frezzing screen...

Obliged to stop car and see what was wrong...I finally reset at each time.

I would ask if it is possible to build a hardware solution which would kill a predefined processus (CF) with ONE button...

Don't answer me "PC reset button" thank you.

VMS · 10-21-2006, 12:28 AM

I just put a switch on the constant battrey line. Flick this and it turns off, then just turn it on again and it should boot.

coucouillu · 10-22-2006, 06:00 AM

Quote: Originally Posted by VMS

I just put a switch on the constant battrey line. Flick this and it turns off, then just turn it on again and it should boot.

It looks like a reset solution...
This don't answer my question...

Quote: Originally Posted by coucouillu

Don't answer me "PC reset button" thank you.

Other suggestions ?

I would like a hardware solution that only kill centrafuse.exe when it crashes by pressing one button (connected via RS232 or esle)

But i don't know if it is possible.

krog · 10-22-2006, 07:25 AM

taskkill /f /im centrafuse.exe

use girder to connect your hardware button.