Here is the info on the controller card: (taken from an ebay auction, thanks jpainter99)
This is the controller used in the Datalux LMV10R. I know the controller will work with the following screens (have tested myself, and can plug directly to controller without Hirose cable or with straight through 31 pin 1:1 cable):
LQ10D321
LQ10D367
LP104V1
LQ10D421
A straight through 1:1 31 pin hirose cable is supposed to also work with the following Sharp LCDs but I don't know for sure if all of these LCD's have a 5v vcc. This controller puts out 5V and some LCDs need 3V.
THE CONTROLLER SHOULD WORK WITH THE FOLLOWING SCREENS.
LQ10D346
LQ10D361
LQ64P311
LQ9D340
LQ10D341
LQ10D344
LQ10D345
LQ64D341
LQ64D343
A custom wired cable for the should work for the following LCDs (search for more info, I do not have pin-outs)
LQ9D031
LQ9P031
LQ9D151
LQ9D161 (this screen is 3.3 volt, would need some regulation from 5V to 3.3V)
LQ9D166
LQ9D167
LQ9D169
LQ10D131
LQ64D141
LQ64D142
LQ64D167
I also have the inverter and 10.4" LQ10D367 LCD. The LCD has a small crack in it but i believe it is still functional. The LCD is bare, and all the wires you need are here. This is a VGA screen with a native resolution of 640X480.
the whole package and deal: $100!!!!! (plus shipping)
Thats it!
PM me or post here, paypal is preffered. let me know if you guys have questions.
EDIT: here is the link to jpainter's auction (for just the controller card):
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=4121363535 if you want to see a picture
Linear Mode
