Fujitsu Stylistic 3400 mini dock pinouts ?

napo7 · 08-05-2008, 03:31 AM

Hi

I've bougth a used 3400, with no power supply... I could find (at my job) a power supply with good voltage and amperage, but not with a good connector.

I've tried to dissassemble the case to solder wires on the connector, but did not managed to get far enought to solder on it

I've read that on the mini-dock, there were power supply pins.

Do someone have this pinouts, or even, measure with a volt-meter where is the supply coming from ??

Best regards

GizmoQ · 08-05-2008, 05:26 AM

Damn, I just Thursday threw away a mini-dock that I had soldered the power wires into. I never could get the pinout for the dock adapter and don't recommend trying to attach anything there (pins way too close). I've torn down this tablet dozens of times, what do you mean "not ... far enough"?

napo7 · 08-05-2008, 05:32 AM

Well, in facts, I've removed the cover, but did not wanted to go too far into the tablet, because I'll had to remove many parts...

I prefer to solder outside than inside the tablet

Edit : Finally, I've managed to get the power connector out, so I could solder my power supply on it

Good news

Thanks for your reply

b_x20852 · 08-08-2008, 02:31 PM

napo7,

it's good to hear that you solved your problem!

Just FYI, and for anyone who is interested - you may look for pinouts in "Fujitsu Stylistic 3500 Technical Reference Guide". Stylistic 3400 has the same connectors.

napo7 · 09-08-2008, 02:44 AM

Hi,

Thanks for your reply,

That was exactly what I was looking for !!

Regards

User Name		Remember Me?
Password