Ricksastar

is there anywhere on the site that would give good directions on how to or at least give some suggestions on how to assemble the pc?

galvitron

It would help if you gave a wee bit more info...

__________________
2006 Lancer Evolution IX MR In-Dash PC Project - WIP

Planning:
[----------] 100%
Purchasing:
[----------] 100%
Installation/Fab/Assembly (Revised):
[----------] 80%

Ricksastar

Western Digital Scorpio WD1600BEVS 160GB 5400 RPM SATA 1.5Gb/s Notebook Hard Drive

Kingston ValueRAM 1GB 240-Pin DDR2 SDRAM DDR2 533 (PC2 4200) Desktop Memory Model KVR533D2N4/1G

Intel BOXD201GLY2A Intel Celeron 220 SiS 662 Micro ATX Motherboard/CPU Combo

then getting an extra fan for cooling.. i have an OLD IBM THINKPAD cd/dvd i would like too use if i could as well.

galvitron

No casing? You'll need something to gather those bits into

__________________
2006 Lancer Evolution IX MR In-Dash PC Project - WIP

Planning:
[----------] 100%
Purchasing:
[----------] 100%
Installation/Fab/Assembly (Revised):
[----------] 80%

tigergibb

__________________
2003 Nissan Xterra Worklog

Total amount spent so far: $1196.64

You will probably spend AT LEAST 2x what you initially budget for your CarPC Project!

2003 Nissan Xterra - Modifications

jayrod7387

check out my picture on ebay. i mounted my setup "open" mobo was mounted to a piece of plexi glass and cooling is obviously better this way.