Quote:
Originally posted by ghent:
<STRONG>I built a little suspension system using 1/4" by 4" bolts, L Brackets and 3/8" by 1.5" Springs.
1) Bolts anchor into the base of the trunk perpindicular to the floor.
2) Put one set of springs onto the bolts
3) Install the case so that the bolts go into the L brackets and the L brackets rest on the springs
4)You might need washers to make sure the springs don't get hung up on the threads of the screws
Put on the next set of springs and put on a wing nut to hold it all together
It works pretty well</STRONG>
Cool - I thougt of doing the same thing, but I just wasn't that ambitious/patient/whatever... I look forward to seeing pics of your install. Post pics along the way, if you can, please 
PS - Welcome to the board 
~m
[ 09-15-2001: Message edited by: dos4who? ]
__________________
PII 266, 512 MB RAM, 10 Gig, 36x CD-ROM, 16x DVD, DeLorme GPS, 5.6" LCD Screen, Dschmidt power controller, Keypower ATX DC-DC Supply, PowerAmp Macro controller, Dauphin mini-Kbd.
Sony Head Unit, Sony Unilink input selector, rear deck Kenwood 6x9's, stock door spkrs... All in my '96 Civic, of course :}
BC ROCKS!!!
|
Linear Mode
