To use GPSProxyPC + Garmin NRoute on PC, the software needed as below:-
GPSProxyPC download here:-
http://prdownloads.sourceforge.net/g...p.exe?download
Garmin NRoute download here:-
http://www.garmin.com/software/nRouteEnglish_261.exe
Note: You must have legal software for Garmin Mapsource in order to work.
com0com download here:-
http://prdownloads.sourceforge.net/c...k.zip?download
1. Install GPSProxyPC, Garmin NRoute, use map installer to install MY map.
2. Install com0com, pls follow its guide included in the zip for installation.
3. Use regedit to change following:-
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\com0com\Parameters\CNCA0]
"PortName"="COM4"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\com0com\Parameters\CNCB0]
"PortName"="COM5"
4. You need to know the COM port connecting to ur GPS Receiver, in my case through Bluetooth using COM Port 7.
5. GPSProxyPC Setting:-
GPS:
GPS type: NMEA0183
GPS COM Port: COM7
Baud Rate: 4800
Application:
Application COM Port: COM4 (which used by com0com)
Baud Rate: 4800
6. Garmin NRoute Setting:-
Goto Utilities -> Select GPS -> Serial Port, select COM5 here.
7. Then follow this sequence, connect GPS Receiver on COM7, Start GPSProxyPC, Start Garmin NRoute and you are ready to go.
GPS Rcr - (COM7) - GPSProxyPC - (COM4) - com0com - (COM5) - NRoute
Other software similiar to com0com as below:-
1. Franson GPSGate PC
http://franson.com/gpsgate/
2. Virtual Serial Ports Driver XP 5.1
http://www.eltima.com/products/vspdxp/