Quote: Originally Posted by
Kosti 
I have the same problem with a brand new 629GL-70NP/C/T (DVI) and the above drivers didn't help. I initially purchased an EBY701 but then realized that my actual carputer will not have VGA but DVI only. Before I realized this I tested the 701 on two different VGA machines and it worked fine, display and touch screen.
The place I bought the 701 was kind enough to exchange it for a 629GL-DVI. The display on the 629 works but the touch screen does not. I installed the drivers (tried both the provided CD and the eGalax stuff online) on both a Win XP Pro and on a MacBook Pro. On both machines and with any driver, it recognizes that the touch screen has been plugged in to the USB but there is no TS response.
A further oddity is that plugging it into the Windows machine causes the machine to be extremely slow responding to button clicks.
Hopefully they will exchange it (yet again!) but is it likely defective? I've heard of non-TS models of the 629. Is it possible that this one has the TS controller but not the TS display?
Two other things I notice different about the 629 vs. the 701. For the round DIN connector the 701 came with a cable that terminated in VGA + USB pigtail. The 629 did not; it only has DIN to VGA (no USB spliced off it). On the 629 there is a short DVI and USB cable sticking out the bottom. On the 701 there was an additional DC power jack on the side (the other one being on the D shell connector); the 629 has only the in-line DC jack off the D-shell connector.
Linear Mode
