one down one to go

wired48 · 09-27-2007, 03:44 PM

just finished LP150x04 panel and now I want to wire the ITSV53C1 I had saved from a Compaq laptop. Anyone has a datasheet or know the pinouts. Really appreciate it.

TIA

bbalazs · 09-27-2007, 04:53 PM

I think it has an LVDS connector.
Perhaps the famous 20 pin:

power, I suppose +3.3V
power
gnd
tx0-
tx0+
gnd
tx1-
tx1+
gnd
....
gnd
gnd

you can measure approx. 100 ohms between the pairs.
The power wires are thicker, the pairs are close and thin.
The gnds are on the same potential as the metal rim.

wired48 · 09-27-2007, 07:14 PM

This one has a ribbon cable with 32 contact points. Three of these contacts are not connected. This cable is replaced by Compaq 152733-01 spare. I'm still trying to find the pinout