Lum

I bought a Liliput off another forum a while back and today I have finally gotten around to trying it.

Unfortunately it's not behaving. It says "no input found" on the BIOS screen, and when you get into Windows, you get a display something like this.



It's not my PC because it works fine with a 14" samsung LCD and because the liliput exhibits the same fault when hooked up to a normal desktop PC as well.

Any idea how to fix this?

MP3Car.com

 

redls1bird

i know that lilli has options like phase, and hertz ( if im not mistaken) although im not 100% sure, i would guess something like that is off since there is an image, its just out of (adjustment) if you will.

__________________
Car Pc progress meter:
[-----------------85%---] Looking good! Total spent : $740, Thats including two touch screens!!!

"The car is the closest we will ever come to creating something that is truly alive" -Sir William Lyons
My worklog

Lum

well, eventually I got the front panel working, then I started randomly mashing buttons, and suddenly it worked. I even had 800x480 for a bit, though the picture was rolling like it couldn't find the vertical sync pulse.

Punky

my xenarc does that sometimes too, but i'm pretty sure its my video card problem not the lcd. I just change the resolution and restart and it seems to work again.

galvitron

it looks like a problem with the timings used by your graphics driver. What kind of graphics adapter? Onboard? PCI-E card?

__________________
2006 Lancer Evolution IX MR In-Dash PC Project - WIP

Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%

MP3Car.com