What do you guys think? Look good? - Page 2

turbocad6 · 03-19-2008, 09:35 AM

you can't take the touchscreen out of the bezel for fabrication? even if it's bonded you still might be able to remove it, gonna be extremely difficult to get good results with it just taped off like that I think... not critisizing, just trying to help, Idon't see how your gonna get perfect results the way your doing that... whatcha gonna do if the ts needs to be replaced? I would seperate the glass from the bezel no matter what...

williamn333 · 03-20-2008, 08:55 AM

You know, you are right, I should have taken the touch out of the bezel. The guy that did this for me did it this way and I asked him how would I replace it if I needed to and he just said we would have to cut it out, so I hope that it doesn't go bad...... do they go bad that often?

2k1Toaster · 03-20-2008, 12:01 PM

Quote: Originally Posted by williamn333

You know, you are right, I should have taken the touch out of the bezel. The guy that did this for me did it this way and I asked him how would I replace it if I needed to and he just said we would have to cut it out, so I hope that it doesn't go bad...... do they go bad that often?

With the temperature severes here I have had 1 replacement in 2 years for my lilliput ripoff.

turbocad6 · 03-20-2008, 03:51 PM

yeah, you should always at least have the ability to replace it. it might not be to late to seperate the bezel from the touch panel, even if it's glued in it's probably just a really thin double sided tape edge... if you do that, then in the future if you ever need to replace it you can always do it the same again... you can get very thin double sided tape at most auto body supply shops, they use this for emblems & small moldings & stuff... it really will be almost impossible to get great results the way he's doing it now tbh...