HAMI 8" Touchscreen monitor

Bunter2000 · 07-29-2008, 08:07 AM

Can anyone help me, I have misplaced my vga lead and need the pinouts for the lead, one end has an 8 pin mini DIN plug and the other end is the standard 15 pin VGA connector.

I have tried so many combinations so the only way is to actually test the lead with an ohmmeter wire for wire.

Bugbyte · 07-29-2008, 09:18 AM

Not sure what you need. This might help.

colin · 07-29-2008, 10:55 AM

He needs the VGA cable pinout for his specific monitor.
The VGA goes into an 8-pin connector, then into the screen.

If you're willing to take the screen apart and check out that connector you could probably figure it all out much easier... wires are typically in numerical order so just use a multimeter to figure out which colour wire goes where and then try connecting pins to it.

Bunter2000 · 07-30-2008, 07:13 AM

Quote: Originally Posted by Bugbyte

Not sure what you need. This might help.

Thanks for that but I needed the specific pinouts for the HAMI 8" Touch Screen Monitor (model 8001) 8pin MINI DIN plug.

Thanks anyway

Bunter2000 · 07-30-2008, 07:14 AM

Quote: Originally Posted by colin

He needs the VGA cable pinout for his specific monitor.
The VGA goes into an 8-pin connector, then into the screen.

If you're willing to take the screen apart and check out that connector you could probably figure it all out much easier... wires are typically in numerical order so just use a multimeter to figure out which colour wire goes where and then try connecting pins to it.

I thought of that but its under warranty and it has a seal.

devlindevlin · 09-15-2008, 07:37 AM

here is the cable pinout:
8 pin Male 15 pin MALE
mini-din VGA
1 Hsync 13
2 R Video 1
3 Vsync 14
4 I2C data 12
5 I2C clock 15
6 G video 2
7 GND 5,6,7,8,10
8 B video 3
Shield Shield
This is measured from original cable. Hope this will help !