smonice

So i have just gotten the lilliput 7 inch touchscreen and there doesnt seem to be any sound working with it. I tried with and without the additional cable and nothing. Here is my setup.

Laptop sound out (which works with headphones) into a mini to red/white adapter. Then the additional cable (red/white)from the adapter to the USB plug into the screen. No Sound. I tried the volume up to 100 and made sure the mute was off and still nothing. Only thing i can think of it when using that cable do i need to use the yellow for video or can i use the vga out??

Is there any other way to test this so i dont have to send it back or something? PLEASE HELP!!!!

Smonice

MP3Car.com

 

entranced

try switching the inputs (using the source button or whatever; that is, change from VGA input to RCA input, etc.) around while you have the sound going out from your laptop. The speaker's not good for much, but when I first got my lilliput, I wanted to make sure it was working too. I didn't get it to work when VGA input was selected. Try switching the input to the others and see if the sound comes through.

smonice

ok ill try that when i get home. but that means there is no way to use the VGA video and the "usb" sound. my whole thing is that i dont wanna have my navigation talking over or during my radio playing. and i only have one set of inputs on the back of my radio and have my ipod running into those. Thanx and any help is appreciated.

smonice

krystar

the "usb" is only for the two RCA inputs and 1 mono input. Yellow is Video 1 and then either ( Red is Video 2 White is Audio ) or other way around . yea kinda sucks that it's not even to convention colors.

Chairboy

If I recall correctly, the Lilliput does not use the audio input when the monitor is in VGA mode.

MP3Car.com