hellow
I have a Built in 7 inch TFT from CARTFT.com .
my system is a epia m II 10000 with 20 gig hard drive .
I run it on e PW70a (100W) and a ITPS
The problem is when I start the car the screen becomes white , then some strange lines appear that go up and down ... like the refresh rate was to high ...
If I then turn of the ignition and put it back on the computer restarts after that the TFT workes fine .
The tft get's it's allimentation of the contact key , so not constant 12V ...
Can annybody help , the carpc is finisched exept for this fault
thx vince,
Linear Mode
