Auto Power On 619 Lilliput - Programing Guide - Page 2

DaKyy · 05-16-2005, 10:15 AM

Worked fine with my 7" Lili, got it off ebay couple of months back. The number string is shorter though? It doesn't need the last digit.

coolboarder · 05-16-2005, 09:22 PM

Quote: Originally Posted by Frankino

I've got the same product but it does not work, your monitor is 800*600 or 640*480 native? mine is 640

Mine is also the 640*480 version.
Here is a picture of it.
http://gaia.ecs.csus.edu/~millert/ca...lliputprog.jpg

Frankino · 05-17-2005, 02:40 AM

hum, exactly the same screen
I've never been able to show up the configuration procedure.. maybe I'm doing something wrong? I typed slowly, about 1 button per second, keeping it pressed about a half second, but it does not show up, any hint?

shizzle · 05-17-2005, 02:49 AM

I am going to try this as soon as I get home!

craignichollls · 05-17-2005, 06:12 AM

Anointed - I love you (well your certainly a good friend of mine right now..) ..!!! This is a right result.. Thanks for posting the detail.

Please make this a "Sticky" or at least add it to "Everything you need to know about your lilliput"

Thanks again Anointed

CTS_V · 05-17-2005, 06:50 AM

Quote: Originally Posted by mox

I can confirm this -- I have the lilliput with the "classic" housing, but with the 10-pin mini-DIN connector.

If only we could get our hands on more of these hidden features...

I can confirm it works for my 'classic' Lilli with the 10pin connector, and also my buddies...any chance we can get our hands on this magic lilli hidden features manual???

MatrixPC · 05-17-2005, 09:16 AM

For those of you who has older version (9PIN DIN connector) and not do the capacitor/resistor mod yet and want to do so, just go a head a do it. This mod didn't work for us. I try it earlier today and nothing happen.
I don't know this mod doesn't work for the model (619GL-70NP) or the remote/IR reciever didn't get all the number/code right. I try it cuz I thought what the hell if it doesn't work it won't break anything

. Yup it doesn't work and it doesn't break

Frankino · 05-17-2005, 09:33 AM

hum can you post a picture of your connector please? I'm not sure if I have the right one

loscooby · 05-17-2005, 12:47 PM

Hi guys and thanks for the great info!

I have also managed to code my lilliput to go into auto power-on mode by
entering the code:588998 after a reset in VGA-mode

My type of lilliput:
619GL 70NP/C/T

/L-O

MatrixPC · 05-17-2005, 02:46 PM

Quote: Originally Posted by loscooby

Hi guys and thanks for the great info!

I have also managed to code my lilliput to go into auto power-on mode by
entering the code:588998 after a reset in VGA-mode

My type of lilliput:
619GL 70NP/C/T

/L-O

How exactly you do that?

loscooby · 05-17-2005, 03:21 PM

Hi,

I was actually a bit surprised myself as I was trying to get the lilliput to accept the code using the procedure mentioned above:

1.In VGA mode, SLOWLY Input "588998" to come into the "factory setup" with the remote control unit.
- My procedure was going into the menu-system via the remote and resetting the screen and wait for the VGAMODE to appear in the top left corner and like the man says slowly input "588998", I am a very stubborn man so I did this a couple of times and the number 2. shows up and then it was easy to enter "1270110" to activate the auto power on followed by pressing any numerkey to do the activation.

Pulled all the power-leds and the lilliput now turns itself on at poweron which is what I want for my indash-install without the housing and keys...

/L-O

Anointed · 05-17-2005, 07:06 PM

Hello everyone, I'm actually looking into getting a list of codes to enter from the manufacturer. I will keep everyone posted.

Anointed · 05-17-2005, 07:12 PM

Hey everyone, can anyone else confirm that this code works on the older Lilliput with the "Classic Housing" other than MOX and SCO. The monitor looks like this....

http://www.mp3car.com/store/images/v...lil7t_logo.jpg

Please let me know so I may change my post and let others who have the older model know it also works on those as well. Thanks Everyone

digitalww · 05-17-2005, 08:52 PM

I tried this on both the 7” and the 8” and it works. I also tried on an older version 7” and it also worked. I think this has always been here. Just amazing.

Few notes: It doesn’t work the same on all monitors. Not all monitors will bring up the input screen as soon as you enter 588998. On some of the monitor I would enter the number and nothing would happen, until I would press the menu (on the remote control). The menu would come but this time it had a header and a footer. On top it said “Factory Mode” and on the bottom “Ver:311”. This header and footer would stay on the menu until the power was cut. However the menu was the same and the monitor didn’t turn ON automatically. I played some more with the monitor and found out that if I exit out of the menu (still in factory mode) and begin entering the number (588998) again, it would only let me enter 5 8 and then brings up the input screen right away. At this point the monitor starts to turn ON automatically. Those who weren’t successful try it again this way.

Armen

Anointed · 05-17-2005, 10:09 PM

Thanks Armen for the Clarification. I've added more programming codes, everyone can link to them here http://www.mp3car.com/vbulletin/showthread.php?t=50258

Enjoy Everyone