LVDS board

itm4l · 12-22-2005, 04:05 PM

I would like to hook up my existing LVDS screen with a Via motherboard with a LVDS module and i was wondering if you think that this LVDS board is good to work with it.

here are pics of the LVDS screen and board

itm4l · 12-22-2005, 04:06 PM

heres another few

Motorcity · 12-22-2005, 04:55 PM

are you asking if the lcd panel you have will work with an lvds-xx module on a via epia board?

itm4l · 12-22-2005, 05:47 PM

i am asking if it will work on a via epia board

Motorcity · 12-22-2005, 10:53 PM

well then let me see...........don't know.
if you can remove the lcd panel and post the make and model #, then I could tell you if it is atleast possible.
the lvds receiver on your display tells me that the monitor you have is meant for a connection to an lvds output on a video card. The lvds board for an epia is a transmitter, and the lcd panel(s) used have the receiver built in.

itm4l · 12-23-2005, 09:12 AM

of the screen

its specialy manufactured though i dont know by who.

It has a touch screen.

jcdillin · 12-23-2005, 09:18 AM

what do the labels on the back of the LCD say

Motorcity · 12-24-2005, 10:32 PM

itm4l · 12-25-2005, 05:52 AM

its a sticker with a serial number. if you need technical info i spoke to the guy that manufactures it and he can give me all the answers that i need.

what he said to me was that as a screen the lvds connection should work on the via motherboard though the touchscreen would not.

if you write to me the technical questions that i should ask him i would greatly appriciate it.

thanks

itm4l · 12-25-2005, 08:35 AM

this is the specs of the stuff that i have right now!!
http://www.italkmore4less.com/PCM-5820ed5.pdf

jcdillin · 12-25-2005, 08:59 AM

So if you can talk to him then tell him to give you the pinout, then you match the pinout up with the VIA board. Then just go to town.

itm4l · 12-25-2005, 09:08 AM

its all there

itm4l · 12-25-2005, 09:12 AM

its all there in the specs all i need to know is if i can replace the motherboard with a via motherboard

Giuliano · 12-25-2005, 10:38 AM

The two LCD panels listed in that PDF, the Toshiba LTM10C042, and Toshiba LTM12C275A, are both TTL/CMOS LCD panels, and not LVDS.

If the LCD panel is one of those two, and it probably is, then no, it will not work with the VIA LVDS board.

The Geode board that you have there does have an LVDS controller, though.

itm4l · 12-25-2005, 11:42 AM

i am 100% sure its a LVDS!!