Apparently the new model fixes the problems mentioned below which I found on this thread:
http://www.mp3car.com/vbulletin/show...highlight=k301
1) Will only switch to the reverse camera if viewing the AV channels, if in VGA mode no switch!
2) When using either the AV channels or reverse camera inputs from power on the screen stays in NTSC mode and fails to detect the PAL signal. Switching sources fixes this but it's annoying as hell.
3) Really annoying feature where it starts up with the default brightness setting not the user presets! This leaves the screen washed out and unreadable.
The Autonode website mentions these new features:
1) The display automatically switches to the rear view camera video input when the vehicle is in reverse gear and then switches back to the previous VGA or video source when taken out of reverse gear
2) The display remembers all user settings and the position set by the
motorized controls after being powered off and back on
It looks like this monitor is the best choice as long as it is installed properly.
Anyone have any problems installing this monitor?