slevytam

Hello,

I just installed my two headrest monitors and am having a huge problem trying to get them to work.

They are connected to the composite video out on the m10000 motherboard. whenever i attempt to enable the video out i get a "OVER RANGE" message on the lillliput. I was told to set the bios to CRT+LCD on the 1.16 bios. That still doesn't work... The screen just went distorted this time. (Note: Ive tried every setting in the bios now)

I even tried switching the bios back to the 1.13 version and it still doesn't work at every bios setting!

Could someone please try and help me with this!!!!

Thanks,

slevytam

MP3Car.com

 

slevytam

I just wanted to add that if I set the motherboard to CRT+TV the lilliput just goes white and the lcds work fine!

JagPuter

Set it to use both... if you can. If you can't do that. Refer to your manual. If you can't do that. It can't be done.

2k1Toaster

Well, from the headreast monitors, with the lilliput still plugged in and white, go to display properties, and see which monitor is the primary, and what the resolutions are on both. I would set the primary to lilliput and the extended desktop to the headrest monitors.

__________________

MP3Car.com