RedGTiVR6

This thread will serve to post all relative information for the Carnetix CNX-P1900 Dual Output 140 watt Regulator.

This thread is not to be used for troubleshooting, but rather for FAQ type responses.

__________________

Firebird2

Hi guys,

One quick tip with regard to the P1900.

Do not earth the case. This will cause issues with Suspend/Hibernation of systems.

For example, if you screw the case to any part on the car that is earthed it does not work correctly.

JDizzle

Even if I screw it into plastic?

RedGTiVR6

it's not going to ground if it's plastic....

__________________

RobPfis07

so wait should i not ground it at all? because im having a problem with my P1900 and macpac. it puts my mac mini to sleep beautifully when i turn off the ignition, but after about 2 or 3 minutes the P1900 shuts off, cutting power to my mac. but itll start the mac up again on ignition and works fine. the only thing it wont do is let my mac sleep in piece. it keeps cutting the power. thanks.

EDIT: whoops sorry i had a jumper set wrong. i thought i had them all right. sorry.

Rocket976

I have my unit attached to plastic, however it is grounded through the wiring is this a problem as I am experiencing shut down a few minutes after sleep?

rgarjr

If you are grounding the black wires off the power connector to chassis ground, then that's the correct way of doing it.

__________________
My carpc worklog