M4-atx (6-30v) 250 Watt - Page 2

GhostRiderDad · 05-17-2008, 12:54 AM

sounds like you have a version of the M4-ATX with an older version of the firmware. If you look for the posting on Everything you want to know about your M4-ATX, you'll see how to build your own board to update the firmware, otherewise you'll have to return your board to where you got it from and get a newer version with the updated software. I'm fortunate that my board works properly.....so far

phuz · 05-17-2008, 07:36 AM

No, Heather from the store told me that mine was delayed because the newer versions were on their way and that was what I was getting.

phuz · 05-19-2008, 10:42 AM

Quote: Originally Posted by phuz

No, Heather from the store told me that mine was delayed because the newer versions were on their way and that was what I was getting.

And...just received an email from her this morning now stating that I must ship mine back and they will send me a new one...even though my correspondence prior to the order being shipped stated that I was receiving a new unit so that I would NOT have to deal with returning this one.

But after re-reading the "Everything you need....." thread, I realized that it states the bug causes the shutdown pulse to take 1min/30sec no matter what the setting is. Well, I have mine set on P1 and it does shutdown after 5 seconds, but the startup pulse takes 1 min and according to the manual, it should be 5 seconds.