boelle

i know i can relearn when i change to another set of tires

but i was looking for an more easy way... where are the sensor id's stored? in the usb board?

MP3Car.com

 

MGD

I am sure they are stored on the PIC.

boelle

well.. could be cool to have a quick way to change between 2 set of tires... but i will do with relearn until then

CannonBaller

Considering you have to buy a new set of TPM sensors, why not just buy a whole new TMPS set. For for each season.

Then all you'll need to do is switch the USB receiver every season. Should take about 5 secs.

boelle

of course... why did i not think that before... thanks for think better than my brain :-)

Dartman_71

I like to know is mp3car shop's TPMS kit compatible with this plugin? If it is, does anyone try it and is't good?

Enforcer

Yes, sort of, waiting to be connected to the PC.

__________________

MGD

So, here is my delemma. I am trying to adjust the pressure settings for the RRTMS from within Road Runner. I wrote a script to read from the RRTMS.ini file to get the values and show them as labels in my skin. Everything is fine with that but here is the real problem. As you can see in the screenshot below, the values are not as set with the RRTMS Config program. If I run the program and set my values for the pressure in PSI to 20 for the low warning and 45 for the high warning and save the values, the ini files has different settings. 20psi will give me a value of 81 and for 45psi a value of 164. Does anyone know the formula to convert this back to a psi value as set by the config tool? Or maybe can be modifyed to store the settings in psi. Any help would be great.

Attached Images

  

MP3Car.com

 

Enforcer

It's probably in Bar (Kpa)

__________________

MGD

The values in the ini file don't change when you change from psi to bar or kpa. That tells me there is a formula in his config tool to display right data.

Enforcer

Yep. So you need to get your script to convert them

__________________

MP3Car.com