Ford Mustang GT 2005 Project Progress - Page 2

romul · 02-12-2006, 09:52 PM

sweetness same here. Mtl-ers at mp3car forum! good luck with ur install. By the way i think ive seen your car close to fleury parked, if it was its the nicest mustand ive seen since the autoshow!

enitalp · 02-12-2006, 10:09 PM

Thanks. it's surely mine. Not so many Sonic blue, more with white stripe and more with 3D carbon body kit. Pretty easy to not take my car for another.
You can easily saw my car at Montreal Mustang Club show.

crazyone · 03-06-2006, 06:04 PM

I really like the 3d carbon "boy racer" setup. Is that their hood? Now all you need is a blower. (i have had tons of fun stangs in teh past, none of which got any bling, other than a few polished superchargers, and at one point a set of twin turbos on my 88 convertible I had) My favorite is still my 2000 lightning, would have LOVE to do something like the car pc in it, unfortunatly i am into boating now and had to sell all my fast toys =( except I got a 200+hp jetski =)..

Going to be cool!
Brandon

enitalp · 03-07-2006, 07:04 AM

Hello.
No this is the factory hood. As i know the 3D Carbon hood is not available.
For the blower, yeah could be a dream, but i still have things to do on track before, actualy i'm at 13.121 on 1/4 with 8 day on track. Hope to reach 12.60 this year with a new gear/header/hpipe/drag tire. And if i win loto i will go with the ford racing supercharge. 460Hp. For the instant i focus on the pc and small modification for drag. The rest is dream.

crazyone · 03-07-2006, 10:22 AM

Quote: Originally Posted by enitalp

Hello.
No this is the factory hood. As i know the 3D Carbon hood is not available.
For the blower, yeah could be a dream, but i still have things to do on track before, actualy i'm at 13.121 on 1/4 with 8 day on track. Hope to reach 12.60 this year with a new gear/header/hpipe/drag tire. And if i win loto i will go with the ford racing supercharge. 460Hp. For the instant i focus on the pc and small modification for drag. The rest is dream.

Ya i didnt look that close on the hood. Figured maybe it was available since the last time i checked (was debating on getting a new stang and toss a blower on it, but bought a new boat instead)

Thats pretty impressive times on a heavy beast. I wouldnt bother with the ford racing blower, its junk compared to what you can get elsewhere. Go with paxton or vortech, you will get a ton more power. The roots type blowers are alot of fun on the street because its instant boost, but the power they make is quite a bit less overall, plus they are a PITA to drag race with, because they make SOO much torq down low you cant hook it up, where as the centrifugals' have a bit smoother progressioin of power.

Either way I am sure you will be happy. I havent owned a NA stang in 10 years, most of them get a blower the day i get um. the last two were mid/low 11 sec cars (on street rubber), its KILLING me driving my F150 everyday now =(

Have fun with it! Sharp car!
B

xbi0s · 03-07-2006, 11:35 AM

Lower her a bit and put some nice alloy rims!!

I am a mustang hater as well, but very nice looking ride my friend.

enitalp · 03-07-2006, 06:15 PM

Rims are coming. Lowering no ! the body kit lower the car already and the road there are full of hole, i already touch sometimes.

The vortech for 2005 is ugly ! And if i go with much power blower i will need to change many things internal in the engine. I'm not ready for this. And for the instant my 300hp are doing well.

thanks you two.

Cris · 03-07-2006, 07:07 PM

Is the screen bezel done yet?

enitalp · 03-07-2006, 08:06 PM

Did some paint on it. My concern is my custom hole for some button. I'm not very happy with them. Searching for a solution. It doesn't look factory. Need to post new pictures. But as my car is still in storage due to snow i can't finish my work now. So i take my time.

Kiriller · 03-07-2006, 08:30 PM

great car dude

and bonjourrrrrr

crazyone · 03-08-2006, 10:02 PM

My question is why are you retaining the factory screen buttons anyway? If thats the 629 lilliput you can make it auto-on without having to press the buttons, and the vol +/vol- are only for the screens speaker and without soldering wires between the switches and a gamepad or something they are worthless to have.

My second comment is that, it looks to me that thats all 100% body filler. That will crack out and isnt going to be very strong. Take a look at 'bondo-glass' with the small strands of fiberglass in it. REAL easy to work with and a ton stronger.

Brandon

enitalp · 03-08-2006, 10:38 PM

Actually i only kept the infrared hole and the select source button (for my future rear camera) all the others button are hidden.

Thanks for the advise on bondo glass. didn't know it.

Need to put the picture of the bezzel painted.

tj!2k4 · 03-08-2006, 10:40 PM

sharp looking car. good luck with the project.

Boozshey · 04-09-2006, 05:50 PM

update???

enitalp · 04-11-2006, 06:26 AM

My car is out from storage since last week. I'm happy.
Still working on software. Found My ODB2 Solution. Still waiting for my FM solution. I also started to check for a new amp to replace the stock radio.
Perhaps this week end i will start to mount all in the car to see how it goes.