StreetDeck crashes in Navigation

terrygold · 01-09-2007, 01:34 PM

After getting the CPU component of my Infill T3 replaced due to a hardware failure, it took me awhile to find the time to get it reinstalled. Everything is working again, except for navigation. When I select Navigation, I see the navigation initializing notice, and then I get the map showing where I happen to be at the moment. Sometimes the map will move a bit as I drive, but sometimes it just doesn't update. In either case, within a minute or two StreetDeck either crashes or is killed by the watchdog because it thinks it is hung.

I have full logs, but here is a section of one from today. Any idea what might be going on? This been happening consistantly since the reinstall of the hardware and the software is as loaded from the factory, except that I've updated to 1.0.6.0 hoping to fix the problem.

Terry

----- log from today ----
WARNING: CNAVGPSController::ProcessRecieveBuffer - Invalid data found in GPS data buffer (PGSV,3,1,09,24,75,285,29,02,64,038,33,12,64,224,2 9,05,59,231,39*74

$GPGSV,3,2,09,10,50,154,40,30,49,292,34,06,23,2,36 ,04,22,056,29*7D

$GPGSV,3,3,09,07,13,298,43*41

$GPRMC,203124.876,A,3956.9429,N,10507.5500,W,14.83 ,140.28,070107,,)
WARNING: CNAVGPSController::ProcessRecieveBuffer - Invalid data found in GPS data buffer (*22

)
WARNING: CNAVGPSController::ProcessCommand - Unable to parse GPS data string ($GPGGA,203125.876,3956.9400,N,10507.5467,W,1,07,1 .6,1607.9,M,,,,0000*2
$GPGSA,A,3,24,02,12,05,30,10,04,,,,,,3.4,1.6,3.0*3 5)!
INFO: CAppData::SaveXMLSettings - Saving XML Settings...
INFO: CAppData::SaveSettings - Saving Binary Settings...
INFO: CAppData::SaveXMLSettings - Saving XML Settings...
INFO: CAppData::SaveSettings - Saving Binary Settings...
INFO: CAppData::SaveXMLSettings - Saving XML Settings...
INFO: CAppData::SaveSettings - Saving Binary Settings...
WARNING: CNAVGPSController::ProcessCommand - Unable to parse GPS data string ($GPGGA,203427.865,3955.9070,N,10507.7065,W,1,07,. 7,1615.0,M,,,,0000*27)!
WARNING: CNAVGPSController::ProcessCommand - Unable to parse GPS data string ($GPGSV,3,2,10,10,51,153,24,30,50,290,38,06,24,300 ,33,04,21,057,32*C)!
WARNING: CNAVGPSController::ProcessCommand - Unable to parse GPS data string ($GPGSA,A,3,24,02,12,05,30,,04,07,,,,,2.2,1.3,1.8* 3A)!
INFO: EXCEPTION DETECTED STACK TRACE FOLLOWS
######## EXCEPTION: 0xC0000005 at address: 0x006BAECE: ACCESS VIOLATION read attempt to address 0x00000008
1: 01/07/07 15:34:46
1: SymGetLineFromAddr(): GetLastError = 126

strohj · 01-09-2007, 02:37 PM

bring up windows task manager and see how busy the processor is when you open the navigation part

you might have to toggle it to be non-full screen in the settings to be able to do that

terrygold · 01-09-2007, 06:40 PM

There were a few spikes to 100% but mostly it hung around 35%. It did work for quite awhile in non-full screen mode and only crashed when I went back to full screen mode. Still, given that StreetDeck ships on the Infill T3 I wouldn't think it should be a problem running in full screen mode. Maybe the problem is just made worse by higher processor demand.

Usually when it crashes, Mappoint has crashed too.

sharpmat007 · 01-09-2007, 07:54 PM

Does it crash when you configure the nav settings to use the sim file? Not sure on the logs, but it looks like its getting invalid gps data which could be due to the gps being bad or com port being bad and/or at the wrong speed...just something to look at.

terrygold · 01-12-2007, 04:30 PM

Not sure, my build doesn't have a GPSSim.txt file, at least not in C:\Program Files\StreetDeck which seems to be where StreetDeck is looking for it.