2003 Durango SLT / Project HiJackZX1 CFSC / 56K= D@mn this $h!+ is gonna load slow! - Page 13

Creative0Mind · 04-22-2009, 10:51 AM

This is awesome. Subscribing.

HiJackZX1 · 04-22-2009, 05:36 PM

Quote: Originally Posted by Bxsteez

Nice work HiJack. First time i've gone through all of your pics. How is that Patriot Drive working for you? I bought one of those too and use to think it was super slow because my boot times were terrible but then i switched to gigabytes motherboard and they have improved so much. Anyway i'll keep following this impressive project.

Thanx, urs is impressive too. I bought the Patriot V2, and I honestly dont see that big of an improvement. Boot times seem the same to me, but remember it could be my POST because I have so many USB devices. Once Windows is running it runs fairly fast. Things seem to transfer quickly and best of all no BSOD. I havent tried hibernation yet though.

Bxsteez · 04-22-2009, 05:42 PM

Man how are u getting buy with no usb devices?!?!?!?! I've been trying to reduce but somethings i just couldn't get rid of. I do post extremely fast now compared to the 30sec post of that crappy msi motherboard.

HiJackZX1 · 04-22-2009, 06:26 PM

Quote: Originally Posted by Bxsteez

Man how are u getting buy with no usb devices?!?!?!?! I've been trying to reduce but somethings i just couldn't get rid of. I do post extremely fast now compared to the 30sec post of that crappy msi motherboard.

No, what I said is I do have USB devices. Currently it has 26 USB ports. With 6 ports open. So I have 20 devices connected. Thats why my POST is so long but not over 30 seconds. If nothing is connected except the basics, then it only takes about 15 seconds or less. 4 ports are exposed for game controllers thumb drives, etc. Then the last 2 hidden ports are going to be for a hand held mouse and a Windows Remote to use with Sling Box when people watch TV.

Bxsteez · 04-22-2009, 07:03 PM

Ahh i c. This shows how well i read your post lol... I tend to glance over things. First i was amazed at no usb ports now i'm amazed at 26. WOW!!!! You are throwing in everything but the kitchen sink(unless that is in the future

)

rdholtz · 04-22-2009, 07:08 PM

Quote: Originally Posted by Bxsteez

WOW!!!! You are throwing in everything but the kitchen sink(unless that is in the future

)

Well, there will probably be a sink in the attached refreshments trailer, but that's a whole separate project that HiJack doesn't even have on the drawing boards, yet.

HiJackZX1 · 04-24-2009, 12:29 AM

Quote: Originally Posted by rdholtz

Well, there will probably be a sink in the attached refreshments trailer, but that's a whole separate project that HiJack doesn't even have on the drawing boards, yet.

LMFAO, I would do something like that, but a trailer hitch wouldn't fit on the body kit I'm getting. It wouldn't look good either.

On a side note, I had one USB port left over and decided to open a thread on what to do with it.

http://www.mp3car.com/vbulletin/gene...last-port.html

I had forgotten about a project I wanted to do. It was to reprogram my armrest to work with my DQP and control key features. I found a device that was made to work with resistive buttons and what not. It was a cool device, but at $30.00 and $16.00 for shipping for a device almost the size of a quarter. I decided to think of options, then I though of it. I can buy a cheap little USB number pad and hack that apart and use the custom buttons.

Here is pictures of the panel so you get an idea.

I plan to use the arrow keys, but remove that toggle button and add a number of keys on top. I will add keys like Play, Voice Command, Volume Up & Down, Forward Rewind, mouse left and mouse right. I will also add buttons for the DQP for 3 way view, and 4 way view. 3 Way is for normal driving, covering rear, left and right. 4 way consisting of the before mentioned, plus a forward facing Cam for track driving.

HiJackZX1 · 04-24-2009, 04:02 PM

I started to realize I needed more then one more port so I ordered a new 4 port hub. Into it will go a mini DVR, the armrest keypad, and a Card Reader. I am trying to see if its worth putting in a powermate. I already have so many ways to adjust the volume. I may just leave a port open for future expansion.

I did a bunch of tweaks for the OS to work flawlessly with my SSD. Somewhere I messed up because the PC is so slow when installing things. I also installed CF, but messed up install a plugin and killed the setup, have to wipe it out and start over. I will do that today.

HiJackZX1 · 04-25-2009, 01:37 PM

I decided to look for a backup software for my install. With this new SSD, I am having alot of issues when experimenting with it to make it fast. I found this page http://http://www.thefreecountry.com...andimage.shtml, which then led me to this page http://www.partimage.org/Main_Page. I am hoping it will work, since Norton Ghost failed me.

freeflashstuff · 04-25-2009, 01:49 PM

Quote: Originally Posted by HiJackZX1

I am hoping it will work, since Norton Ghost failed me.

OMG, Ghost failed you? THE WORLD'S COMING TO AN END!!!!!!!!!!! *hides under his bed*

LOL, but seriously, it failed you? It has never failed me, though, I've failed it... I used it for backups and I hadn't backed up in a week or so, and when I went to back everything up, the HD to be backed up was dead.... Partimage looks good, I may have to try it.

HiJackZX1 · 04-25-2009, 02:07 PM

Quote: Originally Posted by freeflashstuff

OMG, Ghost failed you? THE WORLD'S COMING TO AN END!!!!!!!!!!! *hides under his bed*

LOL, but seriously, it failed you? It has never failed me, though, I've failed it... I used it for backups and I hadn't backed up in a week or so, and when I went to back everything up, the HD to be backed up was dead.... Partimage looks good, I may have to try it.

Ghost backed up my images perfectly, but to restore them was a mission. The SRD disc would freeze all the time. Even when I tried to make a custom SRD disc for my PC with its drivers, it would freeze Ghost 100%. I have used older versions also and the system would act funny. I am officially anti Norton. I get rid of their bloated Anti-Virus a long time ago and use Windows One Care now.

skeet2331 · 04-25-2009, 07:53 PM

I use Clonezilla a lot for image backups. I have not had any problems with it.

HiJackZX1 · 04-25-2009, 08:10 PM

Quote: Originally Posted by skeet2331

I use Clonezilla a lot for image backups. I have not had any problems with it.

I saw Clonezilla..... since you have used it, what happens if your Windows install crashes 100% and you cant boot into Windows... Can you restore from a rescue disk? Does Clonezilla have a resue disk?

skeet2331 · 04-25-2009, 09:02 PM

I have never came across that problem. I don't remember seeing where to create a rescue disk inside clonezilla. However I have seen many people using Clonezilla-SysRescCD. Clonezilla will boot directly into the disk doesn't attempt to hit windows so i'm sure it would fix the problem but I can not tell you for sure. I have not used it as a rescue disk so i'm not much help.

HiJackZX1 · 04-25-2009, 09:12 PM

Quote: Originally Posted by skeet2331

I have never came across that problem. I don't remember seeing where to create a rescue disk inside clonezilla. However I have seen many people using Clonezilla-SysRescCD. Clonezilla will boot directly into the disk doesn't attempt to hit windows so i'm sure it would fix the problem but I can not tell you for sure. I have not used it as a rescue disk so i'm not much help.

I'll keep an eye on it.....

Other news, My front screen kicked the bucket. The controller has gone bad and I think its because of the Florida heat. I have decided to go ahead and replace all the screens with the LED versions, which dont produce alot of heat. I will still go ahead and use fans on all screens for extra cooling. Its a very expensive blow to my install. I am starting to think that maybe I should put this project on hold till I have a steady income coming, because its going to be awhile till I can replace this screen.

User Name		Remember Me?
Password