2007 Ford Falcon XR6 Turbo UTE - Page 2

djmickyg · 02-05-2007, 03:03 AM

Quote: Originally Posted by Dennis5587

looks good so far, but....

Can you really see that screen down there? It looks like its hidden to anyone and everyone, including you

yeah it can be seen.

long.1 · 02-20-2007, 11:45 AM

G'day DJMickyG,

I'm wondering if you can re-link the photos contained in your old abandoned Forx Worklog ? Specifically, I'd like to see the photos in posts #39, #46 and especially #51. Alternatively, if you'd prefer not to revisit the old thread, then perhaps you can re-post some in this thread or provide a link for us ?

I know that Plague was also interested in them - see below.

Quote: Originally Posted by Plague

Any chance of you putting those pics back up? I missed them. Nice work on your bezel by the way.

Keenly following your progress........

Cheers,

Long.1

acejas · 02-21-2007, 07:23 AM

Ive just joined this forum and have been reading the relevant articles of the BA Carputer. I too would love to see those pics that long.1 has requested. Also some more detail on how the facia was hacked. I want to purchase another facia so i work on it etc.
Cant wait to see teh end product DJMickyG and also your mates pics

cheers

djmickyg · 02-21-2007, 07:27 AM

thanks all for the comments..
I will try and find the pictures you are all after.. i can't remember where I put them

work the past few weeks has been slow on this project, I've been very busy.

MrMattyMo · 02-27-2007, 10:08 PM

Keen to see those pics of the moved TFT and ICC screens of your mates!!!

long.1 · 06-29-2007, 12:28 AM

Hey djmickyg,

I see you've updated the top of the worklog with some more progress photos earlier this month - good stuff. Looks like that custom install behind the seats is really coming along. Keen to hear more about what's going in each spot, etc.

Cheers,

Long.1

djmickyg · 06-29-2007, 11:24 AM

thanks for the comments

I have had a little bit og progress the past few weeks.

atm the moment im doing all the re/wiring, tring to make that all look neat, (although im never happy with my wire)

The 3 spots will have the pc in one, a small 8" Rockford Fosgate sub in one box from the old car and the middle box has the amp on one side and all the mess of wires and fuses etc on the other side..

next is to make a cover for all the top so i can put all my rubbish back in it..

mrbean_phillip · 06-30-2007, 10:56 PM

To be honest, I saw Micky's setup a couple weeks ago at the Dyno-day, and it is looking sweet!

Keep up the good work, with those custom enclosures no one will even guess what you have in the UTE

meddler · 07-01-2007, 12:05 AM

djmickyg,

How did you make the enclosures? did you use fleece to make them? I ususally use a chopstrand matt and it never comes out as nice as what you have done for your enclosures.

djmickyg · 07-01-2007, 03:55 AM

Quote: Originally Posted by mrbean_phillip

Keep up the good work, with those custom enclosures no one will even guess what you have in the UTE

thaars the goal, if no one knows its there, no ones going ask to see my bad wiring

Quote: Originally Posted by meddler

How did you make the enclosures? did you use fleece to make them? I ususally use a chopstrand matt and it never comes out as nice as what you have done for your enclosures

na i didnt use fleece, the the base of the boxes i moulded directly in the car, (covered with masking tape), and the flat sides I made seperatly on a flat waxed surface and once dry, i glued it all together with a Resin+talc power mix to make a thick glue and then trimmed off all the excess.
Ive coloured the resin with a black pigmint cus i dont like the look of the blue/green finish normally and i didnt want to spray the insides of the boxes.
I've also used a chop straned max.
hope that alll makes sence.

meddler · 07-01-2007, 04:38 AM

so it's just resin?

btw, the install looks really clean. Nice work

djmickyg · 07-01-2007, 06:46 AM

yep just coloured resin.. no magic tricks here.

meddler · 07-01-2007, 07:08 AM

cool. thanks.

djmickyg · 07-21-2007, 12:20 AM

small update.
Done a little work to the car, new injectors, hi flow cat and a nice tune and I'm now making a healthy 302Kw at the wheel's, goes really good now.. was only aiming for ~270 but they managed to cram more from it.