LinkBack URL
About LinkBacks
Reply With QuoteI have become decent at getting custom drivers built with Intel's IEGD package so if there is not a driver for you yet it can be done. I simply need the timings for the LCD.
I posted the driver over in the 800X480 thread:
http://www.mp3car.com/vbulletin/lcd-...ml#post1155782
What kind of screen are you running? If you have a Xenarc or Lilliput there is probably a driver...
2006 Lancer Evolution IX MR In-Dash PC Project - WIP
Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%
I have become decent at getting custom drivers built with Intel's IEGD package so if there is not a driver for you yet it can be done. I simply need the timings for the LCD.
2006 Lancer Evolution IX MR In-Dash PC Project - WIP
Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%
I have a 800x600 10.4" in my UTE, and a 800x480 Xenarc on my desk - will give your driver a go, thanx
F6 Tornado Project Log ; HP Blackbird Watercooled Server
Beta Tester for Centrafuse and 3dConnexion (No business affiliation with either)
UPDATE:
Drilled and tapped mounting holes for the motherboard. Mounted it using standoffs in the case.
Got the M2-ATX working properly.
Here's some more pics:
2006 Lancer Evolution IX MR In-Dash PC Project - WIP
Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%
Looking good, thanx for the update.
Here is the thread on the mod I am doing with my LS-372 - let me know what you think of it.
These are indeed snappy little boards, amazing how fast they post - I am in luv
F6 Tornado Project Log ; HP Blackbird Watercooled Server
Beta Tester for Centrafuse and 3dConnexion (No business affiliation with either)
UPDATE:
New cables fabbed. More holes drilled. Now time to work on my front end...may have to start another thread for that one.
This thing will be prettier by the time I'm done, I swear!
2006 Lancer Evolution IX MR In-Dash PC Project - WIP
Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%
What sound processor are you going to use?
Zapco DSP6-SL
But I am waiting for the Zapco setup. I am going to get the PC up and running one weekend and then fine tune everything for a while. Once I get that nailed down (and save some more cash) I will pick up the Zapco amps and processor.
For the short term I am just tossing a Kenwood Excelon in the back for the interior.
2006 Lancer Evolution IX MR In-Dash PC Project - WIP
Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%
Baah! Fab, fab, fab, all I do is fab!
I need to go buy a new dremel now
As soon as I get my hard drive support beams cut properly I'll have it in the car.
I decided to buy the JDM 2-din bezel and fab another small, thin bezel that will fill the small cracks between the JDM and the screen. Bezel is en-route from Australia now...
So close yet so far...
2006 Lancer Evolution IX MR In-Dash PC Project - WIP
Planning:
[----------] 100%
Purchasing:
[----------] 90%
Installation/Fab/Assembly (Revised v2):
[----------] 90%
Posting Permissions
Bookmarks