2006 Ford F150 Screw 4x4 Truck - JAPEELER
Starting a thread for my 2006 Ford F150 Screw 4x4 Truck.
Here's My Truck:
Here are my TruckPC Specs so far:
Jetway J9F2-KHDE-PB Mini ITX Motherboard
Intel Dual2Core 2.0GHz T7200
2GB DDR2 677MHz
200GB Toshiba 7200RPM 2.5 HD
Maxtor 500GB Ext. HD Brick USB/FW
TouchScreen: 7" Lilliput
LinkSys a/b/g WiFi USB w/WiFi Finder
GlobalSat BT338 GPS
Morex 3668B Case w/80W P/S (Replaced with a M2-ATX P/S)
Panasonic UJ-85J-B Slim Slot Load DVD±R/±RW/+RDL/RAM Multi Drive
iOGEAR 12n1 Reader/USB Pwr'd Hub System
Sirius Radio System (Working on Connection aspects)
Windows XP SP2 Pro
iNAV iGuidance 4.0 (ReShacked)
RoadRunner FE (Latest)
More Pics and Infomation will be posted as I move Along on this.
I have my TruckPC System running on the Bench and will post pics shortly.
I am looking at installing the system in the Center Console Area, as it does NOT move with my seats and there is PLENTY of room for Everything.
Pics of my TruckPC System on the Bench.
:peace:I just took these of my Truck PC today on my office workbench: :peace:
>> Rear of Case:
>> Mobo and P/S (M2-ATX) Wired up to both Brick/Car Wiring Capabilities:
>> Close Up of the Case Closed (Morex 3688B)
>> Location in my Truck for my TruckPC - PERFECTO!
I will be starting the Fabrication or Slide-out Shelf system and Modifications of the Front 20% Seat Mounting Frame. The system will be totally housed and hidden by the seat and accessibly by just LIFTING the Seat Coushion Up!
All cables will be custom made to be run under the floor molded-carpet system through a hatch area in the middle of the frame area in the floor.
I will be installing a 1000W Power invertor/conditioner to run other systems as I add them to the whole setup. (To power my USB Hubs, Printer and Other Equipment)