2Din Nissan Cefiro DH61AG homemade Case
My goal is to have an all in one carputer in a 2Din homemade case.
I will get pix up shortly.
The case so far consists of 4 X 12.7mm (1/2 " ) solid square Aluminum rods 200mm long - although this may change to 180mm. This is to hold all the panels into place.The panels consisting of 2 X 100mmx200mm pieces 2 X 178mmx200mm 1 X 170mmx160mm - This is for a shelf for the DVD drive and 2 X 178mmx108mm.
On each square rod are holes drilled for the mother board screws with recessed mounting to hold the motherboard at a safe height above the rods.
The motherboard is a DH61AG with an i3 2100T CPU, 2 X 2GB memory sticks @ 1333Mhz and mSATA hard drive 64GB.
I have also installed a half height BT/WiFi card and an Avermedia A306 tuner with PCI-e to mPCI adapter.
Power supply is a DC-DC USB to supply 19VDC.
Amplifier is TDA7850 with D/ion.