Ok, so I had a previous build using a netbook in the glovebox. It was slow, but it ran the system wonderfully for a few years. Then it exploded. One problem I have already ran into is that iNav is no longer supported. I need to find a strong nav package that doesn't cost an arm and a leg. Will need community help with this.
So now I want to do this properly.
OS: Windows 7 64
Tear out all previous netbook installation wiring, and start over. Use 10 guage wire throughout, fused at 20A. Reloom, and ensure all wiring is properly secured.
Too damn cold. Waiting for warmer weather.
RED WIRES: +12V "+12V" <20A Fused at battery.
BLACK WIRES: Grounds "GND"
YELLOW WIRES: Ignition "IGN" +12V, triggered off of a relay, powered by +12V, no fuse needed.
BLUE WIRE: Amp trigger "TRIG" No fuse needed.
Bench test CarPC components with a regular ATX power supply. DONE
Assemble CarPC. Waiting on parts.
Bench test CarPC build, using an AC 115V -> DC 12 25A power supply. Waiting on parts.
Install and test software. DONE
Phase 3: Waiting on parts.
Test all functions.
[ ]Test startup/shutdown with ignition.
[ ]Test antithump.
[ ]Test screen functions.
[ ]Test steering control interface.
[ ]Test audio.
[ ]Test video.
[ ]Test navigation.
[ ]Test OBD-II interface.
[ ]Test Bluetooth.More to come.
Please feel free to comment and give suggestions. Thank you for your help!