Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: mazda MX6 carpc being installed

  1. #11
    FLAC
    Join Date
    Jun 2003
    Location
    Memphis - TN
    Posts
    1,272
    Not to go off topic.
    But it cost me <1K for a ZE I built/rebuilt.
    Since the parts are the same..
    US millenia block/heads/Intake manifold.
    JDM KL31 cams, and KLZE 10:1 CR pistons.
    Block off the EGR.. slap on a KL36 ECU.. Full ZE. . And oh yes its REALLY fast!
    I have a while MX-3 also, its a 4cl, and is slow
    I assume you have KL01 cams? I had a KFZE, swapped it to a ZE.
    You have the JDM power folding mirrors? I have a set I picked up on a ebay a few years ago and put them on my GS.

    Are you on probetalk/mx-3.com or MX6.com?
    2011 Nissan Frontier SL
    AMD X3 2.2 | M4-ATX | 16Gb SSD | 2GB DDR3-1333 | MSI GF615M-P33 MB
    OBDPROS USB | BU-303 GPS l LILLIPUT TS | Car2PC adapter | XM Direct | USB Dual band N with custom mag-mount antenna.

  2. #12
    Low Bitrate
    Join Date
    Sep 2004
    Location
    Jerusalem
    Posts
    81
    no no i live in the UK
    i actually have a whole japanese car!!
    i am on mx3.com and mx6.com and probetalk!!
    in the uk its soooo much more expencive to do swaps buy jdm engine insurance and all that stuff! i wish i lived in the states!!
    my name on all forums is the same rasheedn

    oh and my car has 4ws and auto climate control
    93 MAZDA MX6 KLZE (sold :( )
    2005 STI :)

  3. #13
    Low Bitrate
    Join Date
    Sep 2004
    Location
    Jerusalem
    Posts
    81
    alright alright

    its starting to look a lot better now

    sanded down a lot

    added another later

    sanded that down

    added usb and audio input

    sanded down

    and now its smooooooooth and i mean REALLY smooooth
    tom primer
    i think 2layers r gonna be fine! i ca'nt find any of heckler's docs i donno what happened 2 his profile but they would've been helpful!!damn it

    anyways 2 layers primer
    with a bit of sanding ofcourse! to make sure its smooooth baby!
    then paint
    will see how many layers 2 i think
    wet sand i think?

    am just testing here hehe
    and then lacquer 2 layers as well!
    PC all parts are there
    i still need an amp
    and have no idea what to buy or anything about them! so gonna need 2 learn about them and how 2 hook up all my CRAPPY speakers 2 it sounds like fun! my plan is to have it ready before next friday!!
    sweet
    here r the pics
    comments please
    and yes i did use filler only! i don't care if it cracks! i already started with it
    so might as well finish ! whole thing turns [shizzle]! so what i learnt a lot and will do it with something else next week hehe
    but one comment! sanding is [shizzle]! my fingers r all not moving a lot anymore!!
    but it was worth it! and it still is







    93 MAZDA MX6 KLZE (sold :( )
    2005 STI :)

  4. #14
    Low Bitrate
    Join Date
    Sep 2004
    Location
    Jerusalem
    Posts
    81
    ok so i put 2 layers of primer yesterday (its colourless! donno y the guy gave me that!)
    anyways it looked good 2 me!
    so today after waking up with a huge hangover! i sprayed 1st layer of paint!
    and oh damn! every single scratch shows!! seriously every tiny one! so i sanded down some parts and then put some more filler tiny tiny layers on top of the scratches and holes! gonne wait till tom
    will sand it down again and put some more primer(thin layer) and paint again!!
    btw this is the 1st time i actually do anything like this! so its not too bad! some areas are really good but it just needs more paint and a bit of here and there touches!
    here r some pics




    93 MAZDA MX6 KLZE (sold :( )
    2005 STI :)

  5. #15
    My man uses Levitra. Peoples's Avatar
    Join Date
    Dec 2004
    Location
    Maryland
    Posts
    2,024
    looking good so far, hope the paint turns out nice.
    PC Components:
    Lilliput; XPC/FLEX mobo; 1.7 ghz P4 Mobile;512 DDR; 160 gb HDD; opus 150; slot usb dvd-rw
    My work log

  6. #16
    Newbie
    Join Date
    Dec 2005
    Posts
    6
    i have the same car, but american version. Droppin the KLZE in it soon and turbo kit with a borla exhaust. Im actually building my carpc very soon too, but im using one of those LCDs that hides away into the DIN.

    97 mx6 LS auto ...also, im dropping in a mtx soon too

  7. #17
    Low Bitrate
    Join Date
    Sep 2004
    Location
    Jerusalem
    Posts
    81
    go 2 www.mx6.com for anyhelp with ur car

    i will post some new pics later on
    new paint layer and stuff..
    93 MAZDA MX6 KLZE (sold :( )
    2005 STI :)

  8. #18
    Newbie
    Join Date
    Dec 2005
    Posts
    6
    yeah, i go there the name is killthelights but i dont post much

  9. #19
    Raw Wave EsKALad's Avatar
    Join Date
    Jan 2005
    Location
    Chicago, IL
    Posts
    2,102
    i think thats colorless primer is bull****. the whole point to primer is that it fills up scratches and is colored so you can see where you need work before you paint.
    i got dat ***** sittin on 22s! SUPERMAN EDITION!

  10. #20
    Low Bitrate
    Join Date
    Sep 2004
    Location
    Jerusalem
    Posts
    81
    tottaly agree!! i didn't know it was colourless!!
    i've put 2 layers of paint now and i am not really happy! more scratches and stuff!! gonna buy some sandpaper tomorrow and do it properly!
    i keep on getting scratches

    Quote Originally Posted by EsKALad
    i think thats colorless primer is bull****. the whole point to primer is that it fills up scratches and is colored so you can see where you need work before you paint.
    93 MAZDA MX6 KLZE (sold :( )
    2005 STI :)

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. FS: Mac Mini CarPC Package/Parts LOADED!
    By markcc01 in forum Classified Archive
    Replies: 1
    Last Post: 01-03-2006, 11:47 PM
  2. FS: full carPC package(in a bmw e46)
    By CynicalWry in forum Classified Archive
    Replies: 6
    Last Post: 10-30-2005, 04:14 PM
  3. CarPC PictureViewer! works with ALL engine
    By dragonBTV in forum Software & Software Development
    Replies: 55
    Last Post: 02-02-2005, 09:56 PM
  4. Just installed carpc, need new soundcard
    By Vicked in forum General Hardware Discussion
    Replies: 11
    Last Post: 11-09-2003, 12:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •