2003 Audi A4 Worklog ~ Puff's Ride ~ Now with pics
Well, I have been reading these forums for a long time now and have started in on my project. Here is a quick rundown of my goals, my setup, and my (slow) progress....
To install an in-dash touchscreen that will have music, dvd, video, web, navigation, phone integration, video camera, weather, photos, etc.
2003 Audi A4 1.8t Quattro
(X) = already got it (O) = need to get it
(X) Aopen Pandora 915-B
(X) Celeron 1.5Ghz
(X) 512MB Ram
(X) 40GB 5400rpm 8MB Cache 2.5" HD
(X) Dlink Bluetooth USB
(X) 4 port 5v USB Hub
(X) CompUSA Flexible Mini USB Keyboard
(X) USB Mini Mouse (modded with a blue LED, lol)
(X) Sony Ericson T610 Phone
(X) Webcam to tear up and mount somewhere for video recording/streaming
(O) 7" LCD Touchscreen
(O) Carnetix P1900 PSU
(O) Carnetix 5v add-in for P1900
(X) Fabrication stuff (bondo, sandpaper, fiberglass, etc.)
(O) XM radio hardware
(O) USB GPS receiver
(O) External 2.5" USB 2.0 Hard Drive (100GB+, for music & videos)
(O) Turtle Beach Roadie USB Soundcard
(X) Windows XP Pro (not optimized yet)
(X) PhoCo 1.6 (yeah, I bought it, not cracked/hacked)
(X) RoadRunner for frontend (LSX Void skin)
(O) GPS software (I think iGuidance, but am still :search:'in around)
I am sure I am missing a bunch of stuff from my list, but it is a start...
5/19/06 - Installed Windows XP Pro on carputer
5/20/06 - Retagged and reorganized my music (thanks iTunes... you bastard!)
5/20/06 - Installed RoadRunner with LSX Void skin
5/20/06 - Installed PhoCo 1.6
5/20/06 - Bench testing in progress. So far, so good. Did not run into any major issues with hardware or software yet. Did hit some little obstacles, but I searched the forums and found what I was doing wrong. Waiting for my PhoCo serial key for full install.
5/23/06 - Emailed Zoran about my serial key I never got, he replied very quickly and resent the email. He is a nice guy, it is a damn shame people are using cracked versions of his software, causing him a lot of pain. I mean come on, it's $26 USD! Hell of a deal for such a great addition to a carputer, IMO.
5/27/06 - Upload pics and checked out how the computer fits in the glove box. Fits pretty darn nice!
5/28/06 - Ordered a Metra 9102 Doubel DIN dash kit and a Lilliput 629 project housing. Also ordered two sets of Audi stereo removal tools, as I'll need those when I am ready for pulling the factory headunit. I'll probably hit up home depot after work tomorrow and start getting the fabrication supplies. I found some sheets of ABS plastic from the place I ordered my dash kit, might get some for an ashtray mod (USB ports or something, maybe switches).
6/4/06 - My Lilli 629 project housing came in the mail yesterday (thanks Armen, super quick delivery). I took some pics of it held up near the factory double din stereo. It is a little bit taller than the factory stereo, but I think I may relocate the buttons, or lose them all together and just use the remote. We'll see once the double din bezel arrives and I start planning the LCD housing fabrication. Check out the pics I added to the thread, let me know some comments!
6/6/06 - I saw this thread... http://www.mp3car.com/vbulletin/worklogs/78138-subaru-wrx-tr-wrxtear-carputer-progress-thread.html and it got me to thinking... I need a diagram of my plan! I have seen a trend of people making nice diagrams of their setups. I find these very, very useful... therefore I will be posting a diagram soon. I should have some time at work tomorrow to whip one up...
6/9/06 - OK, I know, where is the diagram? Well, I've been too busy at work to work on it, so it'll have to wait until this weekend or next week. Good news is I started fabricating the lcd bezel and dash kit. Check out my post on page 3 for pics of the progress, and to answer questions I have. Should have the lcd bezel thing done to the point of primer by the end of the weekend...
6/10/06 - I added an update to the thread. I finished the first trial of abs cement on the back today. Waiting for it to dry, then we'll see how it worked out. Check page 3 for pics...
6/11/06 - The back of lcd bezel has dried. Did the front today. Soon comes bondo and sanding. See page 3 for pic updates...
6/12/06 - Did the first layer of bondo. Not a great job, I used way too much. I will sand most of it off tomorrow and try again.
6/13/06 - Uploaded the diagram. The audio stuff needs to be figured out still, but how does the rest look?
6/14/06 - Updated the diagram to show what I hope will be an easy solution for my audio connections. Also, it now features the IGN line to my P1900, and a fuse between the battery and P1900. Did some sanding last night, got my bondo fiasco back to a normal level somewhat. More sanding tonight if I have time...
6/15/06 - Did a lot of posting and reading and searching on the whole audio hookup to factory amp and speakers. I started a thread for this the other day in the Audio forum here hoping to get some more responses. Here is the thread for my audio situation... http://www.mp3car.com/vbulletin/car-audio/78787-car-audio-question-2003-audi-a4-how-to-power-it.html - It has a nice diagram someone posted for my factory setup. Looks like an amp for the front and some type of signal converter to send the signal to both amps (front and rear) will work. Still doing a little more research on the exact stuff I would need, then I will update my carPC diagram...
As for the LCD bezel progress, I picked up some better bondo tools and more sandpaper and will be spending a lot of time this weekend working on it. I'm pretty sure it will turn out fine, just takes me a while as I learn about bondo and fabrication.
6/16/06 - Updated the diagram to show how the audio will be connected to the cars speakers and amps. Thanks to walky talky20 for the advice, and to all those that sent the wiring diagrams for my car audio. This weekend will be a lot of LCD bezel work, picked up some sandpaper last night. Keep checking back for my progress. Are we having fun yet? I know I am!
6/17/06 - Bondo round 2 is done. I posted some pics later in the thread, check them out. Turned out much better this time. Once it is dry I will sand it down and see where I stand...
6/26/06 - Been a while since I did an update. Not much progress. Fixed a few wiring things on the diagram and added the Turtle Beach Roadie instead of the Audigy USB. It is less expensive and I have read some favorable things about it. Went to the SoCal meetup last weekend, loads of fun. It was cool to meet people I've spoke to on the forums, and to see some installs. The LCD from FPD was sick, justifies the high price of $679. More planning and software testing for now until I finish this video project and get some money!
- Need to get my full version of PhoCo working.
- Need to fix skin so it shows picture of incoming call
- Need to test options for using my BT headset while using my phone with BT for PhoCo. I've seen some posts regarding this, so it should be documented somewhere.
- Need more music!
- Post pics of the car's interior so people can suggest cool things to do (DONE)
I want to have the LCD in the dash where my double DIN factory stereo is. I plan on not using a HU at all. I want to put the Aopen in the glovebox, should fit with a little chop-chop to the back of the glovebox. I also want to mount the flexible USB keyboard to the glovebox (the part that folds down when it opens). Not sure how useful this will be since I will have an OSK, and I am usually not riding shotgun in my own car.
Questions for readers:
1. Anyone know about the factory amp setup for a Symphony radio in a 2003 A4? I think the fronts are powered from the HU, and the rears from a small amp somewhere in the back. I could be totally wrong and have yet to really look at it. - ANSWERED
2. Installing the whole thing... This scares me a little. I have a lot of computer install/building knowledge... but little car stereo/electronics knowledge. This whole thing is a learning experience for me, and I plan on making some mistakes along the way. I just don't want to make an expensive mistake, lol. You may be thinking.. "where is the question?" Well, I guess this one is just more of an admitful statement, lol.
3. I am thinking of using a double DIN bezel design for my car and then molding the LCD bezel into it for an OEM look. Would it be stupid of me to buy the LCD and double DIN bezels before I even buy the LCD? I am thinking since I have no experience with this type of fabrication, that I may need some time to finish it. I have seen LCD bezels for both Zarnec and Lilli, around $15-$25 each I think. Figure this way, I have the original LCD bezel in case I ever sell the LCD. - ANSWERED
4. Do I need an external USB sound card? Hmmm.... - ANSWERED
Pics coming soon, as well as updates. Thanks for reading, and thanks for commenting...